Start

just getting the modpack files in here, also added the following folders to git ignore inside the top level of the minecraft folder (the one with save files in it):

/server-resource-packs/
/saves/
/schematics/
/screenshots/
/logs/
/.mixin.out/
/crash-reports/
usernamecache.json
usercache.json

Also I added the following file extensions to be considered "large" by the server as not to pollute diff history here are the commands I used to add these files:

git lfs track "*.jar"
git lfs track "*.zip"
git lfs track "*.7z"
git lfs track "*.gz"
git lfs track "*.rar"
git lfs track "*.tar"
git lfs track "*.iso"

git lfs track "*.png"
git lfs track "*.jpg"
git lfs track "*.jpeg"
git lfs track "*.gif"
git lfs track "*.bmp"
git lfs track "*.tiff"
git lfs track "*.svg"
git lfs track "*.webp"

git lfs track "*.mp3"
git lfs track "*.wav"
git lfs track "*.ogg"
git lfs track "*.flac"
git lfs track "*.aac"
git lfs track "*.m4a"
git lfs track "*.wma"

git lfs track "*.mp4"
git lfs track "*.mkv"
git lfs track "*.avi"
git lfs track "*.mov"
git lfs track "*.webm"
git lfs track "*.flv"
git lfs track "*.wmv"

git lfs track "*.psd"
git lfs track "*.ai"
git lfs track "*.pdf"

git lfs track "*.mca"
git lfs track "*.dat"
git lfs track "*.dat_old"

1.20.1-FearFactoryTest/minecraft/config/createaddition-common.toml

@@ -0,0 +1,150 @@
+
+#Make sure config changes are duplicated on both Clients and the Server when running a dedicated Server,
+# as the config isnt synced between Clients and Server.
+#General Settings
+[general]
+	#Forge Energy conversion rate (in FE/t at 256 RPM, value is the FE/t generated and consumed is at 256rpm).
+	#Range: > 0
+	fe_at_max_rpm = 480
+	#Max stress for the Alternator and Electric Motor (in SU at 256 RPM).
+	#Range: > 0
+	max_stress = 16384
+	#If audio should be enabled or not.
+	audio_enabled = true
+
+#Electric Motor
+[electric_motor]
+	#Electric Motor min/max RPM.
+	#Range: > 1
+	motor_rpm_range = 256
+	#Electric Motor minimum required energy consumption in FE/t.
+	#Range: > 0
+	motor_min_consumption = 8
+	#Electric Motor max input in FE (Energy transfer not consumption).
+	#Range: > 0
+	motor_max_input = 5000
+	#Electric Motor internal capacity in FE.
+	#Range: > 0
+	motor_capacity = 5000
+
+#Alternator
+[alternator]
+	#Alternator max input in FE (Energy transfer, not generation).
+	#Range: > 0
+	generator_max_output = 5000
+	#Alternator internal capacity in FE.
+	#Range: > 0
+	generator_capacity = 5000
+	#Alternator efficiency relative to base conversion rate.
+	#Range: 0.01 ~ 1.0
+	generator_efficiency = 0.75
+
+#Rolling Mill
+[rolling_mill]
+	#Rolling Mill duration in ticks.
+	#Range: > 0
+	rolling_mill_processing_duration = 120
+	#Rolling Mill base stress impact.
+	#Range: 0 ~ 1024
+	rolling_mill_stress = 8
+
+#Wires
+[wires]
+	#Small Connector max input in FE/t (Energy transfer).
+	#Range: > 0
+	small_connector_max_input = 1000
+	#Small Connector max output in FE/t (Energy transfer).
+	#Range: > 0
+	small_connector_max_output = 1000
+	#Small Connector max wire length in blocks.
+	#Range: 0 ~ 256
+	small_connector_wire_length = 16
+	#Small Connector With Light energy consumption in FE/t.
+	#Range: > 0
+	small_light_connector_consumption = 1
+	#Large Connector max input in FE/t (Energy transfer).
+	#Range: > 0
+	large_connector_max_input = 5000
+	#Large Connector max output in FE/t (Energy transfer).
+	#Range: > 0
+	large_connector_max_output = 5000
+	#Large Connector max wire length in blocks.
+	#Range: 0 ~ 256
+	large_connector_wire_length = 32
+	#Ignore checking if block face can support connector.
+	connector_ignore_face_check = true
+	#Allows blocks attached to a connector to freely pass energy to and from the connector network.
+	connector_allow_passive_io = true
+
+#Accumulator
+[accumulator]
+	#Accumulator max input in FE/t (Energy transfer).
+	#Range: > 0
+	accumulator_max_input = 5000
+	#Accumulator max output in FE/t (Energy transfer).
+	#Range: > 0
+	accumulator_max_output = 5000
+	#Accumulator internal capacity per block in FE.
+	#Range: > 0
+	accumulator_capacity = 2000000
+	#Accumulator max multiblock height.
+	#Range: 1 ~ 8
+	accumulator_max_height = 5
+	#Accumulator max multiblock width.
+	#Range: 1 ~ 8
+	accumulator_max_width = 3
+
+#Portable Energy Interface
+[portable_energy_interface]
+	#PEI max input in FE/t (Energy transfer).
+	#Range: > 0
+	pei_max_input = 5000
+	#PEI max output in FE/t (Energy transfer).
+	#Range: > 0
+	pei_max_output = 5000
+
+#Tesla Coil
+[tesla_coil]
+	#Tesla Coil max input in FE/t (Energy transfer).
+	#Range: > 0
+	tesla_coil_max_input = 10000
+	#Tesla Coil charge rate in FE/t.
+	#Range: > 0
+	tesla_coil_charge_rate = 5000
+	#Tesla Coil charge rate in FE/t for recipes.
+	#Range: > 0
+	tesla_coil_recipe_charge_rate = 2000
+	#Tesla Coil internal capacity in FE.
+	#Range: > 0
+	tesla_coil_capacity = 40000
+	#Energy consumed when Tesla Coil is fired (in FE).
+	#Range: > 0
+	tesla_coil_hurt_energy_required = 1000
+	#Hurt range (in blocks/meters).
+	#Range: > 0
+	tesla_coil_hurt_range = 3
+	#Damaged dealt to mobs when Tesla Coil is fired (in half hearts).
+	#Range: > 0
+	tesla_coil_hurt_mob = 3
+	#The duration of the Shocked effect for mobs (in ticks).
+	#Range: > 0
+	tesla_coil_effect_time_mob = 20
+	#Damaged dealt to players when Tesla Coil is fired (in half hearts).
+	#Range: > 0
+	tesla_coil_hurt_player = 2
+	#The duration of the Shocked effect for players (in ticks).
+	#Range: > 0
+	tesla_coil_effect_time_player = 20
+	#Tesla Coil fire interval (in ticks).
+	#Range: > 0
+	tesla_coil_fire_cooldown = 20
+
+#Misc
+[misc]
+	#Diamond Grit Sandpaper durability (number of uses).
+	#Range: > 3
+	diamond_grit_sandpaper_uses = 1024
+	#Barbed Wire Damage.
+	#Range: 0.0 ~ 3.4028234663852886E38
+	barbed_wire_damage = 2.0
+